FAR Noida
Calculate Latest FAR In Noida
Our Noida FAR Calculator Will Give You
Maximum Gross Permissible Area You Can Build On Your Plot
Maximum Number Of Floor Your Can Build
Maximum Height Of Bulding
Areas In The Home Which Are Not Included While Calculating The FAR
Floor Area Ratio (FAR) calculation for plot in Noida as per local Building Bye Laws
Check the Floor area ratio (FAR) for your plot in Noida from the table below. If you have the plot size in sq. yards then make sure to convert it to sq. m There are 0.83612736 square meters in 1 square yard. To convert from square yards to square meters, multiply your figure by 0.83612736 (or divide by 1.1959900463011)
The table shown below is only applicable for plots in Noida.
Plot size is 200 sq. yards. Convert 200 sq. yards to sq. meters by multiplying it by 0.83. After conversion 200 sq. yards comes out to be 167 sq. meters. For a 167 sq. meters plot in Faridabad the Real FAR is 145 and Total FAR after considering the purchasable FAR is 198 (as checked from the table).
FAR = (Total Area Of All Floors * 100)/ Plot AreaTherefore, Total area of all floors = (FAR*Plot Area)/100
Total area of all floors for a 200 sq. yards plot in Noida = (200*198*90/100) = 3564 sq.ft.(Factor of 9 has been used to convert plot size from sq. yards to sq. ft.)
If you are planning to consume the full FAR of your plot in Noida then according to the Greater Noida Bye Laws you can only build 4 floors. Therefore the per floor coverage area comes out to be 3564/4 = 891 sq. ft.
Note: Balconies, Stilt Parking, Basement, Lift Shaft & Mumty are excluded from Floor area ratio (FAR) calculations. This list is not exhaustive and certain areas may get added during finalisation of drawings